可行的，兩種情況。
首先看你的條件，MyThread類實現了Runable，并且內部創建一個線程池。
第一種情況，一次性任務，MyThread跑完就沒了，這樣達不到線程池復用的效果。
第二種情況，循環任務，假設是不斷的從一個Queue中取出數據構造成Runable 然后pool.execute(xxx)，這樣線程池才會發揮出最大的作用。
你仔細看下，是顯示了版本 5.5.1 的，但是夾雜了一堆錯誤，感覺還是包沒裝好，你檢查下系統的環境變量，把 c:program filesnodejs 這個路徑的文件刪干凈再重新裝一下試試。
ng serve --opennpm run devnpm start希望對你有幫助
你先試試 ctrl + ` 能不能打開和關閉控制臺，不能的話檢查下是不是和其他什么插件有快捷鍵沖突
真是個奇怪的需求
下載一個git，看看人家從初始項目到最后的每一步提交，從初始提交開始研究別人的代碼。
最好結合別人提供的文檔
僅供參考
1.首先瀏覽器是請求http://localhost:8080/abc/signup/video沒錯的，發出去的請求被dev-server收到，然后轉發到目標地址，相當于代理
2.不生效是你的配置不對，你主要配置最終請求地址應該是http://122.79.10.259:8080/signup/video
一般全球DNS解析生效時間為48個小時，這個可能和你的網絡環境有關，可以換個環境試試看
有個第三方的庫changelog可以查看一個package的change log.
首先全局安裝changelog,
npm install changelog -g然后使用changelog 來查看某一個package的change log
changelog [packageName] [options]packageName對應你想要查找的包的名稱，options里面有很多選項：比如 all, latest, number等等， 具體的信息可以通過changelog --help查看
比如我輸入命令changelog hapi all
就可以查看hapi所有的release記錄了。
最簡單的就是socket命令嘛 .. if (sock.read() == 'close')
win上測試環境用Docker Toolbox了解下。
virtualbox和git都可以選擇安裝全家加桶你值得擁有,啟動docker-machine ls會出現默認的default。
為何要糾結mobylinuxvm?沒有直接docker-machine create -d mobylinuxvm即可~~
這是正常的，提示信息而已，表明不需要下載那兩個依賴。
navigator.onLine這個監聽網絡變化可以不
docker ps -a ,docker rm 了解一下。
錯在一個細節：RESULT和./B之間需要空格。RESULT= ./B "para1" "para2"。 不然會被認為是設置RESULT的值為./B然后執行"para1"。
同樣第一段代碼if [true]; then的true需要和[和]分開。 if [ true ]; then
剩下的csf.conf配置部分
CONNLIMIT = ""
# Port Flood Protection. This option configures iptables to offer protection
# from DOS attacks against specific ports. This option limits the number of
# new connections per time interval that can be made to specific ports
#
# This feature does not work on servers that do not have the iptables module
# ipt_recent loaded. Typically, this will be with MONOLITHIC kernels. VPS
# server admins should check with their VPS host provider that the iptables
# module is included
#
# For further information and syntax refer to the Port Flood Protection
# section of the csf readme.txt
#
# Note: Run /etc/csf/csftest.pl to check whether this option will function on
# this server
PORTFLOOD = "22;tcp;5;300,80;tcp;500;5"
# Outgoing UDP Flood Protection. This option limits outbound UDP packet floods.
# These typically originate from exploit scripts uploaded through vulnerable
# web scripts. Care should be taken on servers that use services that utilise
# high levels of UDP outbound traffic, such as SNMP, so you may need to alter
# the UDPFLOOD_LIMIT and UDPFLOOD_BURST options to suit your environment
#
# We recommend enabling User ID Tracking (UID_INTERVAL) with this feature
UDPFLOOD = "0"
UDPFLOOD_LIMIT = "100/s"
UDPFLOOD_BURST = "500"
# This is a list of usernames that should not be rate limited, such as "named"
# to prevent bind traffic from being limited.
#
# Note: root (UID:0) is always allowed
UDPFLOOD_ALLOWUSER = "named"
###############################################################################
# SECTION:Logging Settings
###############################################################################
# Log lfd messages to SYSLOG in addition to /var/log/lfd.log. You must have the
# perl module Sys::Syslog installed to use this feature
SYSLOG = "0"
# Drop target for incoming iptables rules. This can be set to either DROP or
# REJECT. REJECT will send back an error packet, DROP will not respond at all.
# REJECT is more polite, however it does provide extra information to a hacker
# and lets them know that a firewall is blocking their attempts. DROP hangs
# their connection, thereby frustrating attempts to port scan the server
DROP = "DROP"
# Drop target for outgoing iptables rules. This can be set to either DROP or
# REJECT as with DROP, however as such connections are from this server it is
# better to REJECT connections to closed ports rather than to DROP them. This
# helps to immediately free up server resources rather than tying them up until
# a connection times out. It also tells the process making the connection that
# it has immediately failed
#
# It is possible that some monolithic kernels may not support the REJECT
# target. If this is the case, csf checks before using REJECT and falls back to
# using DROP, issuing a warning to set this to DROP instead
DROP_OUT = "REJECT"
# Enable logging of dropped connections to blocked ports to syslog, usually
# /var/log/messages. This option needs to be enabled to use Port Scan Tracking
DROP_LOGGING = "1"
# Enable logging of dropped incoming connections from blocked IP addresses
#
# This option will be disabled if you enable Port Scan Tracking (PS_INTERVAL)
DROP_IP_LOGGING = "0"
# Enable logging of dropped outgoing connections
#
# Note: Only outgoing SYN packets for TCP connections are logged, other
# protocols log all packets
#
# We recommend that you enable this option
DROP_OUT_LOGGING = "1"
# Together with DROP_OUT_LOGGING enabled, this option logs the UID connecting
# out (where available) which can help track abuse
DROP_UID_LOGGING = "1"
# Only log incoming reserved port dropped connections (0:1023). This can reduce
# the amount of log noise from dropped connections, but will affect options
# such as Port Scan Tracking (PS_INTERVAL)
DROP_ONLYRES = "0"
# Commonly blocked ports that you do not want logging as they tend to just fill
# up the log file. These ports are specifically blocked (applied to TCP and UDP
# protocols) for incoming connections
DROP_NOLOG = "23,67,68,111,113,135:139,445,500,513,520"
# Log packets dropped by the packet filtering option PACKET_FILTER
DROP_PF_LOGGING = "0"
# Log packets dropped by the Connection Limit Protection option CONNLIMIT. If
# this is enabled and Port Scan Tracking (PS_INTERVAL) is also enabled, IP
# addresses breaking the Connection Limit Protection will be blocked
CONNLIMIT_LOGGING = "0"
# Enable logging of UDP floods. This should be enabled, especially with User ID
# Tracking enabled
UDPFLOOD_LOGGING = "1"
# Send an alert if log file flooding is detected which causes lfd to skip log
# lines to prevent lfd from looping. If this alert is sent you should check the
# reported log file for the reason for the flooding
LOGFLOOD_ALERT = "0"
###############################################################################
# SECTION:Reporting Settings
###############################################################################
# By default, lfd will send alert emails using the relevant alert template to
# the To: address configured within that template. Setting the following
# option will override the configured To: field in all lfd alert emails
#
# Leave this option empty to use the To: field setting in each alert template
LF_ALERT_TO = ""
# By default, lfd will send alert emails using the relevant alert template from
# the From: address configured within that template. Setting the following
# option will override the configured From: field in all lfd alert emails
#
# Leave this option empty to use the From: field setting in each alert template
LF_ALERT_FROM = ""
# By default, lfd will send all alerts using the SENDMAIL binary. To send using
# SMTP directly, you can set the following to a relaying SMTP server, e.g.
# "127.0.0.1". Leave this setting blank to use SENDMAIL
LF_ALERT_SMTP = ""
# Block Reporting. lfd can run an external script when it performs and IP
# address block following for example a login failure. The following setting
# is to the full path of the external script which must be executable. See
# readme.txt for format details
#
# Leave this setting blank to disable
BLOCK_REPORT = ""
# To also run an external script when a temporary block is unblocked. The
# following setting can be the full path of the external script which must be
# executable. See readme.txt for format details
#
# Leave this setting blank to disable
UNBLOCK_REPORT = ""
# In addition to the standard lfd email alerts, you can additionally enable the
# sending of X-ARF reports (see http://www.x-arf.org/specification.html). Only
# block alert messages will be sent. The reports use our schema at:
# https://download.configserver.com/abuse_login-attack_0.2.json
#
# These reports are in a format accepted by many Netblock owners and should
# help them investigate abuse. This option is not designed to automatically
# forward these reports to the Netblock owners and should be checked for
# false-positive blocks before reporting
#
# If available, the report will also include the abuse contact for the IP from
# the Abusix Contact DB: https://abusix.com/contactdb.html
#
# Note: The following block types are not reported through this feature:
# LF_PERMBLOCK, LF_NETBLOCK, LF_DISTATTACK, LF_DISTFTP, RT_*_ALERT
X_ARF = "0"
# By default, lfd will send emails from the root forwarder. Setting the
# following option will override this
X_ARF_FROM = ""
# By default, lfd will send emails to the root forwarder. Setting the following
# option will override this
X_ARF_TO = ""
# If you want to automatically send reports to the abuse contact where found,
# you can enable the following option
#
# Note: You MUST set X_ARF_FROM to a valid email address for this option to
# work. This is so that the abuse contact can reply to the report
#
# However, you should be aware that without manual checking you could be
# reporting innocent IP addresses, including your own clients, yourself and
# your own servers
#
# Additionally, just because a contact address is found, does not mean that
# there is anyone on the end of it reading, processing or acting on such
# reports and you could conceivably reported for sending spam
#
# We do not recommend enabling this option. Abuse reports should be checked and
# verified before being forwarded to the abuse contact
X_ARF_ABUSE = "0"
###############################################################################
# SECTION:Temp to Perm/Netblock Settings
###############################################################################
# Temporary to Permanent IP blocking. The following enables this feature to
# permanently block IP addresses that have been temporarily blocked more than
# LF_PERMBLOCK_COUNT times in the last LF_PERMBLOCK_INTERVAL seconds. Set
# LF_PERMBLOCK to "1" to enable this feature
#
# Care needs to be taken when setting LF_PERMBLOCK_INTERVAL as it needs to be
# at least LF_PERMBLOCK_COUNT multiplied by the longest temporary time setting
# (TTL) for blocked IPs, to be effective
#
# Set LF_PERMBLOCK to "0" to disable this feature
LF_PERMBLOCK = "1"
LF_PERMBLOCK_INTERVAL = "86400"
LF_PERMBLOCK_COUNT = "4"
LF_PERMBLOCK_ALERT = "1"
# Permanently block IPs by network class. The following enables this feature
# to permanently block classes of IP address where individual IP addresses
# within the same class LF_NETBLOCK_CLASS have already been blocked more than
# LF_NETBLOCK_COUNT times in the last LF_NETBLOCK_INTERVAL seconds. Set
# LF_NETBLOCK to "1" to enable this feature
#
# This can be an affective way of blocking DDOS attacks launched from within
# the same network class
#
# Valid settings for LF_NETBLOCK_CLASS are "A", "B" and "C", care and
# consideration is required when blocking network classes A or B
#
# Set LF_NETBLOCK to "0" to disable this feature
LF_NETBLOCK = "0"
LF_NETBLOCK_INTERVAL = "86400"
LF_NETBLOCK_COUNT = "4"
LF_NETBLOCK_CLASS = "C"
LF_NETBLOCK_ALERT = "1"
# Valid settings for LF_NETBLOCK_IPV6 are "/64", "/56", "/48", "/32" and "/24"
# Great care should be taken with IPV6 netblock ranges due to the large number
# of addresses involved
#
# To disable IPv6 netblocks set to ""
LF_NETBLOCK_IPV6 = ""
###############################################################################
# SECTION:Global Lists/DYNDNS/Blocklists
###############################################################################
# Safe Chain Update. If enabled, all dynamic update chains (GALLOW*, GDENY*,
# SPAMHAUS, DSHIELD, BOGON, CC_ALLOW, CC_DENY, ALLOWDYN*) will create a new
# chain when updating, and insert it into the relevant LOCALINPUT/LOCALOUTPUT
# chain, then flush and delete the old dynamic chain and rename the new chain.
#
# This prevents a small window of opportunity opening when an update occurs and
# the dynamic chain is flushed for the new rules.
#
# This option should not be enabled on servers with long dynamic chains (e.g.
# CC_DENY/CC_ALLOW lists) and low memory. It should also not be enabled on
# Virtuozzo VPS servers with a restricted numiptent value. This is because each
# chain will effectively be duplicated while the update occurs, doubling the
# number of iptables rules
SAFECHAINUPDATE = "0"
# If you wish to allow access from dynamic DNS records (for example if your IP
# address changes whenever you connect to the internet but you have a dedicated
# dynamic DNS record from the likes of dyndns.org) then you can list the FQDN
# records in csf.dyndns and then set the following to the number of seconds to
# poll for a change in the IP address. If the IP address has changed iptables
# will be updated.
#
# If the FQDN has multiple A records then all of the IP addresses will be
# processed. If IPV6 is enabled, then all IPv6 AAAA IP address records will
# also be allowed.
#
# A setting of 600 would check for IP updates every 10 minutes. Set the value
# to 0 to disable the feature
DYNDNS = "0"
# To always ignore DYNDNS IP addresses in lfd blocking, set the following
# option to 1
DYNDNS_IGNORE = "0"
# The follow Global options allow you to specify a URL where csf can grab a
# centralised copy of an IP allow or deny block list of your own. You need to
# specify the full URL in the following options, i.e.:
# http://www.somelocation.com/allow.txt
#
# The actual retrieval of these IP's is controlled by lfd, so you need to set
# LF_GLOBAL to the interval (in seconds) when you want lfd to retrieve. lfd
# will perform the retrieval when it runs and then again at the specified
# interval. A sensible interval would probably be every 3600 seconds (1 hour).
# A minimum value of 300 is enforced for LF_GLOBAL if enabled
#
# You do not have to specify both an allow and a deny file
#
# You can also configure a global ignore file for IP's that lfd should ignore
LF_GLOBAL = "0"
GLOBAL_ALLOW = ""
GLOBAL_DENY = ""
GLOBAL_IGNORE = ""
# Provides the same functionality as DYNDNS but with a GLOBAL URL file. Set
# this to the URL of the file containing DYNDNS entries
GLOBAL_DYNDNS = ""
# Set the following to the number of seconds to poll for a change in the IP
# address resoved from GLOBAL_DYNDNS
GLOBAL_DYNDNS_INTERVAL = "600"
# To always ignore GLOBAL_DYNDNS IP addresses in lfd blocking, set the following
# option to 1
GLOBAL_DYNDNS_IGNORE = "0"
# Blocklists are controlled by modifying /etc/csf/csf.blocklists
#
# If you don't want BOGON rules applied to specific NICs, then list them in
# a comma separated list (e.g "eth1,eth2")
LF_BOGON_SKIP = ""
# The following option can be used to select either HTTP::Tiny or
# LWP::UserAgent to retrieve URL data. HTTP::Tiny is much faster than
# LWP::UserAgent and is included in the csf distribution. LWP::UserAgent may
# have to be installed manually, but it can better support https:// URL's
# which also needs the LWP::Protocol::https perl module
#
# For example:
#
# On rpm based systems:
#
# yum install perl-libwww-perl.noarch perl-LWP-Protocol-https.noarch
#
# On APT based systems:
#
# apt-get install libwww-perl liblwp-protocol-https-perl
#
# Via cpan:
#
# perl -MCPAN -eshell
# cpan> install LWP LWP::Protocol::https
#
# We recommend setting this set to "2" as upgrades to csf will be performed
# over SSL to https://download.configserver.com
#
# "1" = HTTP::Tiny
# "2" = LWP::UserAgent
URLGET = "2"
###############################################################################
# SECTION:Country Code Lists and Settings
###############################################################################
# Country Code to CIDR allow/deny. In the following two options you can allow
# or deny whole country CIDR ranges. The CIDR blocks are generated from the
# MaxMind GeoLite2 Country database at:
# https://dev.MaxMind.com/geoip/geoip2/geolite2/
# This feature relies entirely on that service being available
#
# Specify the the two-letter ISO Country Code(s). The iptables rules are for
# incoming connections only
#
# Additionally, ASN numbers can also be added to the comma separated lists
# below that also list Country Codes. The same WARNINGS for Country Codes apply
# to the use of ASNs. More about Autonomous System Numbers (ASN):
# http://www.iana.org/assignments/as-numbers/as-numbers.xhtml
#
# You should consider using LF_IPSET when using any of the following options
#
# WARNING: These lists are never 100% accurate and some ISP's (e.g. AOL) use
# non-geographic IP address designations for their clients
#
# WARNING: Some of the CIDR lists are huge and each one requires a rule within
# the incoming iptables chain. This can result in significant performance
# overheads and could render the server inaccessible in some circumstances. For
# this reason (amongst others) we do not recommend using these options
#
# WARNING: Due to the resource constraints on VPS servers this feature should
# not be used on such systems unless you choose very small CC zones
#
# WARNING: CC_ALLOW allows access through all ports in the firewall. For this
# reason CC_ALLOW probably has very limited use and CC_ALLOW_FILTER is
# preferred
#
# Each option is a comma separated list of CC's, e.g. "US,GB,DE"
CC_DENY = ""
CC_ALLOW = ""
# An alternative to CC_ALLOW is to only allow access from the following
# countries but still filter based on the port and packets rules. All other
# connections are dropped
CC_ALLOW_FILTER = ""
# This option allows access from the following countries to specific ports
# listed in CC_ALLOW_PORTS_TCP and CC_ALLOW_PORTS_UDP
#
# Note: The rules for this feature are inserted after the allow and deny
# rules to still allow blocking of IP addresses
#
# Each option is a comma separated list of CC's, e.g. "US,GB,DE"
CC_ALLOW_PORTS = ""
# All listed ports should be removed from TCP_IN/UDP_IN to block access from
# elsewhere. This option uses the same format as TCP_IN/UDP_IN
#
# An example would be to list port 21 here and remove it from TCP_IN/UDP_IN
# then only counties listed in CC_ALLOW_PORTS can access FTP
CC_ALLOW_PORTS_TCP = ""
CC_ALLOW_PORTS_UDP = ""
# This option denies access from the following countries to specific ports
# listed in CC_DENY_PORTS_TCP and CC_DENY_PORTS_UDP
#
# Note: The rules for this feature are inserted after the allow and deny
# rules to still allow allowing of IP addresses
#
# Each option is a comma separated list of CC's, e.g. "US,GB,DE"
CC_DENY_PORTS = ""
# This option uses the same format as TCP_IN/UDP_IN. The ports listed should
# NOT be removed from TCP_IN/UDP_IN
#
# An example would be to list port 21 here then counties listed in
# CC_DENY_PORTS cannot access FTP
CC_DENY_PORTS_TCP = ""
CC_DENY_PORTS_UDP = ""
# This Country Code list will prevent lfd from blocking IP address hits for the
# listed CC's
#
# CC_LOOKUPS must be enabled to use this option
CC_IGNORE = ""
# This Country Code list will only allow SMTP AUTH to be advertised to the
# listed countries in EXIM. This is to help limit attempts at distributed
# attacks against SMTP AUTH which are difficult to achive since port 25 needs
# to be open to relay email
#
# The reason why this works is that if EXIM does not advertise SMTP AUTH on a
# connection, then SMTP AUTH will not accept logins, defeating the attacks
# without restricting mail relaying
#
# This option can generate a very large list of IP addresses that could easily
# severely impact on SMTP (mail) performance, so care must be taken when
# selecting countries and if performance issues ensue
#
# The option SMTPAUTH_RESTRICT must be enabled to use this option
CC_ALLOW_SMTPAUTH = ""
# Set this option to a valid CIDR (i.e. 1 to 32) to ignore CIDR blocks smaller
# than this value when implementing CC_DENY/CC_ALLOW/CC_ALLOW_FILTER. This can
# help reduce the number of CC entries and may improve iptables throughput.
# Obviously, this will deny/allow fewer IP addresses depending on how small you
# configure the option
#
# For example, to ignore all CIDR (and single IP) entries small than a /16, set
# this option to "16". Set to "" to block all CC IP addresses
CC_DROP_CIDR = ""
# Display Country Code and Country for reported IP addresses. This option can
# be configured to use the MaxMind Country Database or the more detailed (and
# much larger and therefore slower) MaxMind City Database. An additional option
# is also available if you cannot use the MaxMind databases
#
# "0" - disable
# "1" - Reports: Country Code and Country
# "2" - Reports: Country Code and Country and Region and City
# "3" - Reports: Country Code and Country and Region and City and ASN
# "4" - Reports: Country Code and Country and Region and City (freegeoip.net)
#
# Note: "4" does not use the MaxMind databases directly for lookups. Instead it
# uses a URL-based lookup from a third-party provider at https://freegeoip.net
# and so avoids having to download and process the large databases. Please
# visit the https://freegeoip.net and read their limitations and respect that
# this option will either cease to function or be removed by us if that site is
# abused or overloaded. ONLY use this option if you have difficulties using the
# MaxMind databases. This option is ONLY for IP lookups, NOT when using the
# CC_* options above, which will continue to use the MaxMind databases
#
CC_LOOKUPS = "1"
# Display Country Code and Country for reported IPv6 addresses using the
# MaxMind Country IPv6 Database
#
# "0" - disable
# "1" - enable and report the detail level as specified in CC_LOOKUPS
#
# This option must also be enabled to allow IPv6 support to CC_*, MESSENGER and
# PORTFLOOD
CC6_LOOKUPS = "0"
# This option tells lfd how often to retrieve the MaxMind GeoLite2 Country
# database for CC_ALLOW, CC_ALLOW_FILTER, CC_DENY, CC_IGNORE and CC_LOOKUPS (in
# days)
CC_INTERVAL = "14"
###############################################################################
# SECTION:Login Failure Blocking and Alerts
###############################################################################
# The following[*] triggers are application specific. If you set LF_TRIGGER to
# "0" the value of each trigger is the number of failures against that
# application that will trigger lfd to block the IP address
#
# If you set LF_TRIGGER to a value greater than "0" then the following[*]
# application triggers are simply on or off ("0" or "1") and the value of
# LF_TRIGGER is the total cumulative number of failures that will trigger lfd
# to block the IP address
#
# Setting the application trigger to "0" disables it
LF_TRIGGER = "0"
# If LF_TRIGGER is > "0" then LF_TRIGGER_PERM can be set to "1" to permanently
# block the IP address, or LF_TRIGGER_PERM can be set to a value greater than
# "1" and the IP address will be blocked temporarily for that value in seconds.
# For example:
# LF_TRIGGER_PERM = "1" => the IP is blocked permanently
# LF_TRIGGER_PERM = "3600" => the IP is blocked temporarily for 1 hour
#
# If LF_TRIGGER is "0", then the application LF_[application]_PERM value works
# in the same way as above and LF_TRIGGER_PERM serves no function
LF_TRIGGER_PERM = "1"
# To only block access to the failed application instead of a complete block
# for an ip address, you can set the following to "1", but LF_TRIGGER must be
# set to "0" with specific application[*] trigger levels also set appropriately
#
# The ports that are blocked can be configured by changing the PORTS_* options
LF_SELECT = "0"
# Send an email alert if an IP address is blocked by one of the [*] triggers
LF_EMAIL_ALERT = "1"
# [*]Enable login failure detection of sshd connections
#
# SECURITY NOTE: This option is affected by the RESTRICT_SYSLOG option. Read
# this file about RESTRICT_SYSLOG before enabling this option:
LF_SSHD = "5"
LF_SSHD_PERM = "1"
# [*]Enable login failure detection of ftp connections
#
# SECURITY NOTE: This option is affected by the RESTRICT_SYSLOG option. Read
# this file about RESTRICT_SYSLOG before enabling this option:
LF_FTPD = "10"
LF_FTPD_PERM = "1"
# [*]Enable login failure detection of SMTP AUTH connections
LF_SMTPAUTH = "5"
LF_SMTPAUTH_PERM = "1"
# [*]Enable syntax failure detection of Exim connections
LF_EXIMSYNTAX = "10"
LF_EXIMSYNTAX_PERM = "1"
# [*]Enable login failure detection of pop3 connections
#
# SECURITY NOTE: This option is affected by the RESTRICT_SYSLOG option. Read
# this file about RESTRICT_SYSLOG before enabling this option:
LF_POP3D = "0"
LF_POP3D_PERM = "1"
# [*]Enable login failure detection of imap connections
#
# SECURITY NOTE: This option is affected by the RESTRICT_SYSLOG option. Read
# this file about RESTRICT_SYSLOG before enabling this option:
LF_IMAPD = "0"
LF_IMAPD_PERM = "1"
# [*]Enable login failure detection of Apache .htpasswd connections
# Due to the often high logging rate in the Apache error log, you might want to
# enable this option only if you know you are suffering from attacks against
# password protected directories
LF_HTACCESS = "5"
LF_HTACCESS_PERM = "1"
# [*]Enable failure detection of repeated Apache mod_security rule triggers
LF_MODSEC = "5"
LF_MODSEC_PERM = "1"
# [*]Enable detection of repeated BIND denied requests
# This option should be enabled with care as it will prevent blocked IPs from
# resolving any domains on the server. You might want to set the trigger value
# reasonably high to avoid this
# Example: LF_BIND = "100"
LF_BIND = "0"
LF_BIND_PERM = "1"
# [*]Enable detection of repeated suhosin ALERTs
# Example: LF_SUHOSIN = "5"
#
# SECURITY NOTE: This option is affected by the RESTRICT_SYSLOG option. Read
# this file about RESTRICT_SYSLOG before enabling this option:
LF_SUHOSIN = "0"
LF_SUHOSIN_PERM = "1"
# [*]Enable detection of repeated cxs ModSecurity mod_security rule triggers
# This option will block IP addresses if cxs detects a hits from the
# ModSecurity rule associated with it
#
# Note: This option takes precedence over LF_MODSEC and removes any hits
# counted towards LF_MODSEC for the cxs rule
#
# This setting should probably set very low, perhaps to 1, if you want to
# effectively block IP addresses for this trigger option
LF_CXS = "0"
LF_CXS_PERM = "1"
# [*]Enable detection of repeated Apache mod_qos rule triggers
LF_QOS = "0"
LF_QOS_PERM = "1"
# [*]Enable detection of repeated Apache symlink race condition triggers from
# the Apache patch provided by:
# http://www.mail-archive.com/dev@httpd.apache.org/msg55666.html
# This patch has also been included by cPanel via the easyapache option:
# "Symlink Race Condition Protection"
LF_SYMLINK = "0"
LF_SYMLINK_PERM = "1"
# [*]Enable login failure detection of webmin connections
#
# SECURITY NOTE: This option is affected by the RESTRICT_SYSLOG option. Read
# this file about RESTRICT_SYSLOG before enabling this option:
LF_WEBMIN = "0"
LF_WEBMIN_PERM = "1"
# Send an email alert if anyone logs in successfully using SSH
#
# SECURITY NOTE: This option is affected by the RESTRICT_SYSLOG option. Read
# this file about RESTRICT_SYSLOG before enabling this option:
LF_SSH_EMAIL_ALERT = "1"
# Send an email alert if anyone uses su to access another account. This will
# send an email alert whether the attempt to use su was successful or not
#
# SECURITY NOTE: This option is affected by the RESTRICT_SYSLOG option. Read
# this file about RESTRICT_SYSLOG before enabling this option:
LF_SU_EMAIL_ALERT = "1"
# Send an email alert if anyone accesses webmin
#
# SECURITY NOTE: This option is affected by the RESTRICT_SYSLOG option. Read
# this file about RESTRICT_SYSLOG before enabling this option:
LF_WEBMIN_EMAIL_ALERT = "1"
# Send an email alert if anyone logs in successfully to root on the console
#
# SECURITY NOTE: This option is affected by the RESTRICT_SYSLOG option. Read
# this file about RESTRICT_SYSLOG before enabling this option:
LF_CONSOLE_EMAIL_ALERT = "1"
# This option will keep track of the number of "File does not exist" errors in
# HTACCESS_LOG. If the number of hits is more than LF_APACHE_404 in LF_INTERVAL
# seconds then the IP address will be blocked
#
# Care should be used with this option as it could generate many
# false-positives, especially Search Bots (use csf.rignore to ignore such bots)
# so only use this option if you know you are under this type of attack
#
# A sensible setting for this would be quite high, perhaps 200
#
# To disable set to "0"
LF_APACHE_404 = "0"
# If this option is set to 1 the blocks will be permanent
# If this option is > 1, the blocks will be temporary for the specified number
# of seconds
LF_APACHE_404_PERM = "3600"
# This option will keep track of the number of "client denied by server
# configuration" errors in HTACCESS_LOG. If the number of hits is more than
# LF_APACHE_403 in LF_INTERVAL seconds then the IP address will be blocked
#
# Care should be used with this option as it could generate many
# false-positives, especially Search Bots (use csf.rignore to ignore such bots)
# so only use this option if you know you are under this type of attack
#
# A sensible setting for this would be quite high, perhaps 200
#
# To disable set to "0"
LF_APACHE_403 = "0"
# If this option is set to 1 the blocks will be permanent
# If this option is > 1, the blocks will be temporary for the specified number
# of seconds
LF_APACHE_403_PERM = "3600"
# This option will keep track of the number of 401 failures in HTACCESS_LOG.
# If the number of hits is more than LF_APACHE_401 in LF_INTERVAL seconds then
# the IP address will be blocked
#
# To disable set to "0"
LF_APACHE_401 = "0"
# This option is used to determine if the Apache error_log format contains the
# client port after the client IP. In Apache prior to v2.4, this was not the
# case. In Apache v2.4+ the error_log format can be configured using
# ErrorLogFormat, making the port directive optional
#
# Unfortunately v2.4 ErrorLogFormat places the port number after a colon next
# to the client IP by default. This makes determining client IPv6 addresses
# difficult unless we know whether the port is being appended or not
#
# lfd will attempt to autodetect the correct value if this option is set to "0"
# from the httpd binary found in common locations. If it fails to find a binary
# it will be set to "2", unless specified here
#
# The value can be set here explicitly if the autodetection does not work:
# 0 - autodetect
# 1 - no port directive after client IP
# 2 - port directive after client IP
LF_APACHE_ERRPORT = "0"
# If this option is set to 1 the blocks will be permanent
# If this option is > 1, the blocks will be temporary for the specified number
# of seconds
LF_APACHE_401_PERM = "3600"
# This option will send an alert if the ModSecurity IP persistent storage grows
# excessively large: https://goo.gl/rGh5sF
#
# More information on cPanel servers here: https://goo.gl/vo6xTE
#
# LF_MODSECIPDB_FILE must be set to the correct location of the database file
#
# The check is performed at lfd startup and then once per hour, the template
# used is modsecipdbalert.txt
#
# Set to "0" to disable this option, otherwise it is the threshold size of the
# file to report in gigabytes, e.g. set to 5 for 5GB
LF_MODSECIPDB_ALERT = "0"
# This is the location of the persistent IP storage file on the server, e.g.:
# /var/run/modsecurity/data/ip.pag
# /var/cpanel/secdatadir/ip.pag
# /var/cache/modsecurity/ip.pag
# /usr/local/apache/conf/modsec/data/msa/ip.pag
# /var/tmp/ip.pag
# /tmp/ip.pag
LF_MODSECIPDB_FILE = "/var/run/modsecurity/data/ip.pag"
# System Exploit Checking. This option is designed to perform a series of tests
# to send an alert in case a possible server compromise is detected
#
# To enable this feature set the following to the checking interval in seconds
# (a value of 300 would seem sensible).
#
# To disable set to "0"
LF_EXPLOIT = "300"
# This comma separated list allows you to ignore tests LF_EXPLOIT performs
#
# For the SUPERUSER check, you can list usernames in csf.suignore to have them
# ignored for that test
#
# Valid tests are:
# SUPERUSER,SSHDSPAM
#
# If you want to ignore a test add it to this as a comma separated list, e.g.
# "SUPERUSER,SSHDSPAM"
LF_EXPLOIT_IGNORE = ""
# Set the time interval to track login and other LF_ failures within (seconds),
# i.e. LF_TRIGGER failures within the last LF_INTERVAL seconds
LF_INTERVAL = "3600"
# This is how long the lfd process sleeps (in seconds) before processing the
# log file entries and checking whether other events need to be triggered
LF_PARSE = "5"
# This is the interval that is used to flush reports of usernames, files and
# pids so that persistent problems continue to be reported, in seconds.
# A value of 3600 seems sensible
LF_FLUSH = "3600"
# Under some circumstances iptables can fail to include a rule instruction,
# especially if more than one request is made concurrently. In this event, a
# permanent block entry may exist in csf.deny, but not in iptables.
#
# This option instructs csf to deny an already blocked IP address the number
# of times set. The downside, is that there will be multiple entries for an IP
# address in csf.deny and possibly multiple rules for the same IP address in
# iptables. This needs to be taken into consideration when unblocking such IP
# addresses.
#
# Set to "0" to disable this feature. Do not set this too high for the reasons
# detailed above (e.g. "5" should be more than enough)
LF_REPEATBLOCK = "0"
# By default csf will create both an inbound and outbound blocks from/to an IP
# unless otherwise specified in csf.deny and GLOBAL_DENY. This is the most
# effective way to block IP traffic. This option instructs csf to only block
# inbound traffic from those IP's and so reduces the number of iptables rules,
# but at the expense of less effectiveness. For this reason we recommend
# leaving this option disabled
#
# Set to "0" to disable this feature - the default
LF_BLOCKINONLY = "0"
###############################################################################
# SECTION:Clo1.是否有跨域？
2.cookie有同域 同源 策略.
找到了方法，在新電腦中還原回了舊電腦的cmder版本v.1.3.3，該版本可在github中找到
我這個是哪里有問題
北大青鳥APTECH成立于1999年。依托北京大學優質雄厚的教育資源和背景，秉承“教育改變生活”的發展理念，致力于培養中國IT技能型緊缺人才，是大數據專業的國家
北大青鳥中博軟件學院創立于2003年，作為華東區著名互聯網學院和江蘇省首批服務外包人才培訓基地，中博成功培育了近30000名軟件工程師走向高薪崗位，合作企業超4
中公教育集團創建于1999年，經過二十年潛心發展，已由一家北大畢業生自主創業的信息技術與教育服務機構，發展為教育服務業的綜合性企業集團，成為集合面授教學培訓、網
達內教育集團成立于2002年，是一家由留學海歸創辦的高端職業教育培訓機構，是中國一站式人才培養平臺、一站式人才輸送平臺。2014年4月3日在美國成功上市，融資1
曾工作于聯想擔任系統開發工程師，曾在博彥科技股份有限公司擔任項目經理從事移動互聯網管理及研發工作，曾創辦藍懿科技有限責任公司從事總經理職務負責iOS教學及管理工作。
浪潮集團項目經理。精通Java與.NET 技術， 熟練的跨平臺面向?qū)ο箝_(kāi)發經驗，技術功底深厚。 授課風格 授課風格清新自然、條理清晰、主次分明、重點難點突出、引人入勝。
精通HTML5和CSS3；Javascript及主流js庫，具有快速界面開發的能力，對瀏覽器兼容性、前端性能優化等有深入理解。精通網頁制作和網頁游戲開發。
具有10 年的Java 企業應用開發經驗。曾經歷任德國Software AG 技術顧問，美國Dachieve 系統架構師，美國AngelEngineers Inc. 系統架構師。
掃碼關注鍍金池微信號
手機訂課，優惠多多